Revlon Magnet Blonde Developer 20 Vol

Revlon Magnet developed mineral oil-based developers with 3 different concentrations: 10, 20 and 30 Vol. (3%, 6% and 9%). These developers were formulated to achieve the best results in any bleaching technique, providing precise lightening and respecting the hair fibre. They must be used exclusively with Revlon Magnet Bondes bleaches.

The Revlon Magnet Developer 20 VOL is the MEDIUM LIFT* step (medium lift) of the BondIN SystemTM technology, which protects your hair's internal bonds while offering a 360º protective shield against external aggressors (pollutants, UV radiation, chemical and mechanical factors), as all of them have a negative impact on the health and structure of your hair fibre and even on the desired colour result. This developer is your best ally for gentle lightening and ideal timing control.

Active ingredients:

• Mineral Oil – also known as liquid petrolatum, liquid paraffin or liquid vaseline, mineral oil with emollient properties, is an excellent ally when aiming to keep hair hydrated. It improves and maintains the hair treatment, leaving it with a beautiful and healthy effect for longer. Mineral oil promotes the formation of a protective film around the strands, which prevents hair damage and reduces water loss. This ingredient is perfect for use on dry and brittle hair, leaving it soft and shiny.

Directions for use: Must be used exclusively with Revlon Magnet Bondes bleaches.

• In a non-metallic bowl, mix the bleaching powder with Revlon Magnet Developer 10, 20 or 30 VOL.;
• Mix as follows:  1 part bleach + 2 parts developer cream (for example 30g Revlon Magnet Bleach 7 + 60g Revlon Magnet Developer);
• Immediately after preparing the mixture, put on gloves and apply to dry, unwashed hair with the aid of a brush;
• For touch-ups, when applying to the scalp area, use a maximum of Revlon Magnet Developer 20 VOL.;
• Avoid overlapping on previously bleached hair sections;
• The processing time is up to 45 minutes, maximum.
• Check the lightening level every 5 minutes to ensure the desired result is achieved;
• After the processing time, rinse thoroughly.

*The mixing ratio may differ depending on the technique used and the desired result. Thus, 1:2 is the recommended proportion, which can vary between 1:1.5 and 1:2.5

Very important:  48 hours before application, perform a skin allergy test; Perform a strand test and evaluate the condition of the hair as well as its chemical history;

Also use ….

• To ensure greater safety and protection, use Revlon Anti-Porosity Milk. A universal protector that can be used before and after technical services. It rebalances hair porosity, prevents scalp irritation, and significantly improves results when used before any bleaching process, making it ideal for sensitised hair;
• Under the Framar brand, you'll find all the necessary accessories for your technical work, from various types of brushes for different effects, bowls that connect to facilitate simultaneous colour use, coloured foil rolls, and super practical colour residue cleaning wipes;
• The heat from hairdryers, straighteners, and stylers contributes to faster colour fading and can damage your hair, especially if it is more fragile.  Therefore, whenever you opt for a heat source, use a thermal protector suitable for the temperature of the equipment you use; 
• Bleached hair is more susceptible to external influences, so you should take special care with UV rays; during periods when your hair is most exposed to the sun (for example: at the beach/pool), use a sunscreen protector;

INGREDIENTS: AQUA/WATER/EAU PARAFFINUM LIQUIDUM/MINERAL OIL/HUILE MINERALE, CETEARYL ALCOHOL, HYDROGEN PEROXIDE, PEG-40 CASTOR OIL, PENTASODIUM PENTETATE, PHOSPHORIC ACID, SODIUM CETEARYL SULFATE, SODIUM NALE STANNATE, SODIUM SULFATE, SODIUM BENZOATE. B01027.