Revlon Magnet Blonde Oxidant 30 Vol

Revlon Magnet has developed mineral oil-based oxidants with 3 different concentrations: 10, 20 and 30 Vol. (3%, 6% and 9%). These oxidants have been developed to achieve the best results in any bleaching technique, clarifying precisely and respecting the hair fibre. They must be used exclusively with Revlon Magnet Blonde lighteners.

Revlon Magnet Oxidant 20 VOL is the HIGH LIFT* step of the BondIN SystemTM technology that protects the internal bonds of your hair, while offering a 360º protective shield against external aggressors (pollutants, UV radiation, chemical and mechanical factors), since all of them have a negative impact on the health and structure of your hair fibre and even on the desired colour result. This oxidant is your best ally for gentle lightening and ideal timing control.

Active ingredients:

• Mineral Oil – also known as liquid petrolatum, liquid paraffin or liquid vaseline, mineral oil with emollient properties is a great ally when we want to keep our hair hydrated. It improves and maintains the treatment done to the hair, leaving it with a beautiful and healthy effect for longer. Mineral oil promotes the formation of a protective film around the strands, which prevents hair from being damaged and reduces water loss. This ingredient is perfect for use on dry and brittle hair, leaving hair soft and shiny.

How to use: Must be used exclusively with Revlon Magnet Blonde lighteners.

• In a non-metallic bowl, mix the bleaching powder with Revlon Magnet Oxidant 10, 20 or 30 VOL.;
• Mix as follows: 1 part lightener + 2 parts oxidant cream (e.g. 30g Revlon Magnet Lightener 7 + 60g Revlon Magnet Oxidant);
• Immediately after preparing the mixture, put on gloves and, with the aid of a brush, apply to dry, unwashed hair;
• For touch-ups, when applying to the scalp area, use Revlon Magnet Oxidant 20 VOL. maximum;
• Avoid overlapping on previously bleached hair sections;
• Processing time is up to 45 minutes maximum.
• Check the lightening level every 5 minutes to verify if the desired result has been achieved;
• After the processing time, rinse thoroughly.

*The mixing ratio may differ depending on the technique used and the desired result. Thus, 1:2 is the recommended proportion, which may vary between 1:1.5 and 1:2.5

Very important: 48h before application, perform a skin allergy test; Perform a strand test and evaluate the condition of the hair as well as its chemical history;

Also use ….

• To ensure greater safety and protection, use Revlon Anti Porosity Milk. A universal protector that can be used before and after technical services. It rebalances hair porosity, prevents scalp irritation and significantly improves results when used before any bleaching process, making it ideal for sensitised hair;
• In the Framar brand, you will find all the necessary accessories for your technical work, from various types of brushes for different effects, bowls that connect to facilitate the simultaneous use of colours, coloured aluminium foil rolls and super practical colour residue cleaning wipes;
• The heat from hairdryers, straighteners and stylers contributes to faster colour fading and can damage your hair, especially if it is more fragile. Therefore, whenever you opt for a heat source, use a thermal protector suitable for the temperature of the equipment you are using;
• Bleached hair is more susceptible to external influences, so you should take special care with UV rays; during periods when your hair is more exposed to the sun (e.g. at the beach/pool), use a sun protection filter;

INGREDIENTS: AQUA/WATER/EAU PARAFFINUM LIQUIDUM/MINERAL OIL/HUILE MINERALE, CETEARYL ALCOHOL, HYDROGEN PEROXIDE, PEG-40 CASTOR OIL, PENTASODIUM PENTETATE, PHOSPHORIC ACID, SODIUM CETEARYL SULFATE, SODIUM STANNATE, SODIUM SULFATE, SODIUM BENZOATE. B01028.